How to create a new virtual machine in vSphere Esxi 5.x? you might think that this process is easy for those who know a simple process, but I would like to tell you about how to create a new virtual machine on VMware Esxi 5.x versions.

How to create a new virtual machine in vSphere Esxi 5.x?

First of all, to create a guest, ie a virtual machine, we right click on the host or any of our hosts and click on the New Virtual Machine section.

New Virtual Machine tab is clicked, then the first antivirus Configuration page comes out. I choose Custom from the Typical and Custom options that are located in here. The difference between Custom and Typical; If we were to choose Typical here,

Virtual Machine Version,
CPUs,
Memory,
SCSI Controller,
Select a Disk

options will not come out. Here I choose Custom to explain each one individually. In normal installation you can select Typical and continue.

We’ll name it guest here. We are careful not to use any special characters. If you have problems accessing guest’s files from SSH in case of any problem, I will continue because I am the only datacenter. If you have different datacenter, you can select them according to your situation.

We select the datastore you want to use here. It’s up to you to choose. I choose the datastore that is suitable for me. And if I have DRS open, I will have different options here. The database will display “Disable Storage DRS for this virtual machine “. Disable DRS on this guest. You can also set this in the Cluster Settings. In order not to do extra processing, Vmware added this to the direct installation. You can disable it if you do not mind. Do not forget to open Storage DRS if you do not trust your storage.

Here we are specifying the Virtual Machine Version. I am currently running Virtual Machine Version 8 on ESX 5. The difference between Virtual Machine Version 7 and Virtual Machine Version 8 is below;

Here I choose Version 8, so I continue with Next.

On the guest operating system screen; We specify the operating system in the guest. Please note that you need to point out the version correctly. When you select 2008 and select guest 2008, if you mount 2003 iso, 2003 drivers are installed in that guest. Continue with .Next.

We will give the guest the amount of CPU we are giving.

Number of virtual sockets: The actual number of CPUs you will give to the guest.

Number of cores per virtual socket: Here we specify the number of cores in the CPU.

Depending on the intensity of the guest, you can adjust it according to your own.

As you can see from the name of the memory part of the RAM amount is set. Yanlız want to specify here. Avoid giving plenty of resources to the guest. Give as much resources as you can, and create performance bottlenecks in the over-resource.

Here you will specify how many nic, which adapter to use, which network to use and where to create it. Here I will explain only the adapter part because you will choose the other parts according to your needs. You can use the following KB to select the adapter. if we are short;

E1000 is the network card of intel. It does not require any driver.

VMXNET 2: A performance network card, but the operating system it supports is limited.

VMXNET 3: The most powerful network card. VMXNET 2 is the next most capable card.

http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1001805

How to create a new virtual machine in vSphere Esxi 5.x?

In order to use VMXNET network cards, VMware Tools must be installed on the guest.

This section is automatically selected and will be selected. This section will be selected according to the operating system that we have specified in the operating system. I will describe it in a separate article series because it is a long and detailed topic.

Select a from the disk partition; We specify the disk we will create.

Create a new virtual disk: Create a new disk,

Use an existing virtual disk: Use an existing disk,

Raw Device Mappings: If you want to add the disk as RDM Device (RDM Device Mapping), you can choose this. RDM can tell you the simplest way. You need to choose Raw Device Mappings if you want to connect the LUN you created on the storage directly to the host.

Do not create disk: If you do not create a disc in this stage and want to create a disc later, we choose Do not create disc.

I choose Create a new virtual disk to create a new disk.

Create a disk is in the partition; We will specify the size of the disk we will create from the disk size partition.

Thick Provision Lazy Zeroed: All of the space you specify is allocated from the datastore. If we select Lazy-zeroed here, the blocks in the disk are reset when the data is written, so disi occurs briefly.

Thick Provision Eager Zeroed: All of the area you specify is allocated from the datastore. If we select Eager Zeroed here, the blocks in the disc will be reset directly without writing any data.

Thin Provision: Different from other disk methods. They do not allocate the space you specify from the datastore. It opens itself as you use the disk. You can see it in more detail below.

I can explain this to you. In the above way,

We see a 40GB thick disk defined in VM1 guest. 40GB is allocated directly from Datastore because it is provided.

We see VM2 guest still define a 40GB thin disk. However, since the thin disk is given, not all the size given in the datastore is occupied as much space as the used space.

What is the difference between them and what should we use?

If you are doing a setup in production environment, I definitely do not recommend you to choose Thin disk. There are several reasons for this.

On a thin disk, you have to keep track of the datastore. For some reason your disk may grow and not leave space in the datastore.

Thin disk is a performance problem. This is because it enlarges the disk when you use it. You have a SQL machine and you create it as thin. because the disk is thin, I will try to expand itself in the datastore and it will output an unnecessary I / O.

I would suggest that you choose one of the Thick disk methods here. When choosing a hot disk, it is better to decide whether you want it to be lazy or eager, but if you ask me, I will choose an eager if you are doing an installation in the production environment.

In the Location section;

We specify in which datastore the disk to be created is to be stored. Here we are: Selecting the Store with the virtual machine; If we want to keep the disk on a different datastore, we choose Specify datastore or datastore cluster if we want the guest to be stored in the datastastore on the host it finds.

Since I did not install in the Production environment, I select Lazy to create the disc immediately and continue with Next.

In the Advanced Options section; From the Virtual Device Node section; SCSI ID can be specified. We do not do anything about SCSI ID because we do not create RDM. We leave it as default.

Mode section;

Persistent: The information we have in the guest, the changes we made remain on the disk.

Nonpersistent: Changes made on the disk are not fixed. Every time you close the machine, the information in it is deleted.

Undoable: If you choose this option, you will be asked what you need to do when you close the Guest.

I leave everything here as default and I keep going.

On the Ready to Complete screen, we see all the settings we have made. Here I select the option to mount the ISO and then continue with Continue.

How to create new virtual machines in vSphere Esxi 5.x?

We enter the New CD / DVD screen on the Virtual Machine Properties screen and the Datastore ISO file section is selected. From here we display the ISO file and press the OK button. If we do not tick the Connect at power on option above, our guest machine which we created will not be mounted. I’m getting out of here and sending the Guest’ime Power on command.

In the Summary section, I am sending the Power on command to Guest.

From the console screen, we can install the ISO that we have installed on the guest.

Vmware vSphere Esxi 5.x how to create a new virtual machine search tags:

• esxi 5 x64
• esxi 5 x86
• esxi 5 xserve
• esxi 5 xserve raid
• esxi 5.1
• esxi 5.1 kurulumu
• esxi 5.5
• esxi 5.x license
• esxi download
• esxi nedir
• vmware esxi 5.1
• vmware esxi 5.1 download
• vmware esxi 5.5
• vmware esxi 5.5 download
• vmware esxi download
• vmware indir
• vmware player
• vmware vsphere
• vmware vsphere 5.5
• vmware vsphere client 5.1 download
• vmware vsphere client download
• vmware vsphere client indir
• vmware workstation
• vmware workstation 10 serial
• vmware workstation indir
• vsphere
• vsphere client download
• vsphere nedir
• vsphere web client
• vsphere web client download

How do I create a new virtual machine in vSphere Esxi 5.x? it has been a useful article. Good work. (Source: tayfundeger.co I)